405.213.0492
Helical Anchors & Tiebacks2026-10-22T13:30:18-05:00

Commercial Helical Anchors & Tiebacks in Oklahoma City

Helical anchors and tiebacks deliver engineered lateral support for commercial walls, excavations and buildings throughout Oklahoma City.

What Are Commercial Helical Anchors & Tiebacks?

Helical anchors and tiebacks are steel shafts with helix-shaped plates that are installed into stable soil beyond the area of movement. They tie into a wall or structure to provide lateral support and help stop further movement.

Where helical piers support structures from below, helical tiebacks are usually installed at an angle to resist sideways forces. The helix plates carry those forces into stable soil, delivering support without grout or cure time.

When Oklahoma City Commercial Projects Need Helical Tiebacks

Helical tiebacks can stabilize retaining walls, commercial foundation walls and other structures showing signs of leaning, rotation, sliding or bulging. Movement can also surface as horizontal wall cracks or shifts in pavement and loading areas behind the wall. They can also deliver lateral support for planned commercial projects, including excavation shoring, soldier pile and lagging systems, seawalls and bulkheads, plus tiedown applications where uplift or overturning forces must be resisted.

Our Commercial Helical Anchor & Tieback Solutions Vesta Foundation Solutions

  • Retaining Walls That Are Leaning, Cracking or Overturning

    Permanent Wall Tieback Anchors

    Permanent helical tiebacks provide lateral restraint for retaining walls, foundation walls, sheet pile walls, seawalls and other structures undergoing lateral movement. Set through or behind the wall and advanced into competent soil beyond the failure plane, the anchors carry lateral loads into stable soil to help stabilize the structure and resist further movement.

    • Installed with relatively small equipment for projects with limited access
    • Develop capacity through helix plates embedded in competent soil
    • Installation torque provides an indication of soil resistance and anchor capacity
    • No grout or cure time needed before the anchor can be loaded
    • Can be built into retaining wall and other permanent stabilization systems
    • Offered in configurations suited to project loads and soil conditions

  • Excavations That Need Lateral Support Next to Existing Structures

    Temporary Helical Tiebacks for Shoring

    Temporary helical tiebacks offer lateral support for excavation and shoring systems where the surrounding soil must be restrained during construction. They can be paired with soldier pile and lagging, sheet pile and other earth retention systems, including projects near existing buildings where excavation movement and available working space are important considerations.

    • Provides temporary lateral restraint for excavation support systems
    • Installs with no grouting or waiting for grout to cure
    • Can be loaded right after installation and verification
    • Well suited to congested sites and limited-access construction areas
    • Installation torque can be tracked as the anchor advances
    • Can be set up for the loads, soils and geometry of the shoring system

  • Structures Resisting Uplift, Overturning or Lateral Thrust

    Helical Tiedowns & Tension Anchor Systems

    Helical tiedowns and tension anchors secure structures against forces that can pull, overturn or move them from their designed position. Set into load-bearing soil, these anchors can deliver tension resistance for new construction and other commercial applications where foundations or structural components must resist uplift, overturning or lateral forces.

    • Designed to resist tension, uplift and overturning forces
    • Helix plates move loads into suitable bearing soils
    • Installs with no large excavations or concrete anchor blocks
    • No grout or cure time needed
    • Installation torque can be monitored to help confirm capacity
    • Available in shaft and helix configurations for a range of loads and soil conditions
How it works

How Commercial Helical Tiebacks Are Designed & Installed

1.

Site & Project Assessment

The structure, site conditions, available geotechnical information and project requirements are reviewed to determine the appropriate helical tieback solution.

2.

Anchor Design & Configuration

Anchor location, angle, spacing, length and required capacity are established according to the structure, anticipated loads and soil conditions.

3.

Helical Tieback Installation

Each anchor is advanced into the soil at the specified angle. Installation torque is tracked continuously as the anchor advances to the required depth and into suitable bearing soils.

4.

Structural Connection

The installed tieback is connected to the wall or shoring system with the specified connection components.

5.

Load Testing & Capacity Verification

When required by the project specifications, anchors are load-tested to verify performance and confirm they meet the specified design requirements.

6.

Project Documentation

Installation records, testing results and other required documentation are provided to the project team or engineer of record for project closeout.

Helical Tiebacks vs. Grouted Tiebacks & Soil Nails

Helical tiebacks install with no grout or cure time, need minimal excavation and can be loaded immediately after installation. Installation torque is monitored as each anchor is installed to help verify it meets project requirements.

Grouted tiebacks depend on grout to secure the anchor in the ground and can be better suited to certain high-load or rock conditions.

Soil nails work differently, reinforcing the soil behind a wall or excavation rather than anchoring the wall itself.

The right earth retention system comes down to the loads it needs to support, soil conditions, wall design, site access and other project requirements.

Commercial Helical Anchor & Tieback Installation You Can Trust in Oklahoma City

The right helical anchor or tieback system starts with understanding the loads, soil conditions, structure and project requirements. Vesta Foundation Solutions works with the project team to determine the appropriate anchor configuration, layout and installation criteria for the application.

Contact Vesta Foundation Solutions to review your commercial helical anchor or tieback project in Oklahoma City and get a solution developed around your structure, site conditions and project needs.

What To Expect

Ready to get started?

Schedule a free estimate to start your repair journey with Vesta.

Schedule your inspection

Fill out our form or give us a call to book your inspection. Share what you’ve noticed so we can send the right expert to your home.

Full home
inspection

An expert will inspect the problem area and surrounding conditions, including soil movement, drainage, structural integrity, and any related concerns.

Clear explanation
of findings

We’ll walk you through what we’re seeing in easy-to-understand language so you know the root cause of the issue, not just the symptoms.

Review recommendations

If repairs are needed, we’ll outline your options, pricing, and timeline so you can make the best decision for your home.

Schedule your free inspection—

It'll only take
a minute

Meet with a trusted expert, and get
clear answers about your home.

"*" indicates required fields

1Your Info
2Schedule Your Inspection
3Review & Submit

Customer Information

Don't just take our word for it

See what our customers have to say about our work.

This is for logan and rolo who showed up at the appointed time and did a great job. they had a breakdown of equipment and had to come back the day after but were prompt to finish the job. During the repair, a car became stuck in a neighbors driveway and they were the first to help the person- to help someone else in need. I was really impressed with that. I give a 5 star review and rating. I plan to do additional work because they would be doing it. I enjoyed their friendliness and workmanship.

Brent M. | Coweta, OK

Everything went as expected, maybe a little better! Very nice crew, enjoyed the installation all around!

Bob H. | Tulsa, OK

Gino H. from Shawnee, OK purchased a charming old home built in 1939 with a full basement. Expanding soils that are so prevalent in many areas of OK exert an enormous pressure on foundations. As a result, most homes with full basements will eventually develop some sort of structural issue over time. When Gino learned about the problems, he decided to call Vesta Foundation Solutions for help. In this video, he speaks about his experience with the company. He is so happy with the service that he is hiring the company again, to repair another one of his properties. “I would absolutely recommend Vesta Foundation Solutions to any friends or family,” says Gino.

Gino H. | Shawnee, OK

“We knew something wasn’t right when the doors stopped closing properly and cracks started showing up. The Vesta team walked us through everything with total transparency. The crew was professional, fast, and left our place cleaner than they found it. Now our home feels solid again, and we finally have peace of mind.”

David R. | Luther, OK

“I’ll give the guys (Cory and Jose) a great 5+ rating. Great, efficient installation. They were very pleasant and professional.”

Nancy S. | Guthrie, OK

“We had no idea how bad things had gotten under our house until the Vesta team showed us the damage. They were honest, thorough, and explained everything clearly. The crew worked efficiently, replaced the damaged wood, and gave our floors the support they needed. It’s such a relief to walk through the house and not feel everything shifting. We’re incredibly thankful for the work they did.”

Sally B. | Nicoma Park, OK

Bryan and Cornileus were amazing. Our project was huge and required a lot of heavy lifting. Every day, they came to work with smiles on their faces and were hardworking the entire time. Bryan was great at communicating the process and what to expect. He would call me every morning to let me know where he was and at what time to expect him. Very reliable. They both are great around kids and were a joy to have in our home! Thanks guys!!

Shelby D. | Crescent, OK

I had a sinking concrete apron around my pool. I was considering replacing the concrete, which is very expensive, or “mudjacking” the concrete back in position. For about the same price as mudjacking, I hired Vesta Foundation Solutions to inject a polymer in the ground and bring the concrete back in position. I was very pleased with the results, and I feel I saved a considerable amount of money from other solutions available to me. William Blake, the hands-on owner, did an excellent presentation of his product. The work was completed in a timely manner by Adam and Daniel, who took extra time to explain the process as they were doing the work. The work site was cleaned up when the fellows were finished, and Mr. Blake reviewed the finished work to ensure I was satisfied. I am very satisfied with this type of concrete lifting process, and I can certainly recommend the workforce at Vesta Foundation Solutions for their professionalism, thoroughness, and friendliness in getting the work done.

David O. | Edmond, OK

Ricardo and his team did an excellent job installing my 10 piers. He was very informative, polite, and took good care of my yard and my house. Definitely would use them again.

Mia J. | Edmond, OK

Before & after photos

Check out before and after photos from some of our completed projects.
View All Before & Afters

Find Your Local Vesta Location

Vesta Foundation Solutions of Oklahoma City and Arkansas are the experts for concrete leveling and repair, foundation repair, basement waterproofing and crawl space repair and more. We proudly service Fayetteville and all of Greater Fort Smith surrounding areas in Arkansas, Oklahoma City, Tulsa, Edmond in Oklahoma.

Commercial Helical Anchors & Tiebacks FAQs

What determines the cost of a commercial helical tieback project in Oklahoma City?2026-10-06T10:48:44-05:00

Cost comes down to the number and capacity of the anchors, installation depth, soil conditions, site access, wall or shoring configuration, connection requirements, testing and other project-specific factors. Contact Vesta Foundation Solutions to review your project and the scope required for your site. 

Are helical anchors and tiebacks code-compliant?2026-10-06T10:48:06-05:00

Helical anchor systems can be designed and specified to satisfy applicable building codes and project requirements. Requirements for a particular project vary by application, jurisdiction, design and specified system. Vesta Foundation Solutions works with the project team to determine the appropriate system and installation requirements. 

Can helical anchors be installed on limited-access or still-operating commercial sites in Oklahoma City?2026-10-06T10:47:31-05:00

Often, yes. Helical anchors can be installed with relatively compact equipment and usually create minimal vibration and spoils, which makes them well suited for many limited-access and occupied commercial sites. Actual access requirements and impacts to operations depend on the project and where the anchors are installed. 

Do helical tiebacks require grout or curing time? 2026-10-06T10:46:22-05:00

Generally, no. Helical tiebacks build capacity through helix plates advanced into the soil rather than through a grouted bond zone. With no grout to cure, the anchors can usually be loaded immediately after installation. 

How deep are helical tiebacks installed, and how far apart? 2026-10-06T10:44:30-05:00

There’s no standard depth or spacing for every project. Helical tiebacks must extend beyond the anticipated failure plane and into suitable bearing soil. Their length, angle and spacing are set by factors such as soil conditions, wall geometry, loading and required anchor capacity. 

How much load can a commercial helical tieback hold? 2026-10-06T10:43:42-05:00

Tieback capacity varies depending on anchor configuration, soil conditions, installation depth and project requirements. Commercial helical tiebacks are selected for the required design load, and installation torque is monitored as the anchor advances to help verify that installation requirements are being met. 

How do helical tiebacks stabilize a failing retaining wall?2026-10-06T10:42:51-05:00

Helical tiebacks are installed through or behind the retaining wall and advanced beyond the unstable soil into competent soil. Once connected to the wall, the anchors move lateral loads into the surrounding soil to help stabilize the wall and resist additional leaning, sliding or overturning. 

What is the difference between a helical anchor and a helical tieback?2026-10-06T10:41:51-05:00

A helical anchor is a broad term for a steel anchoring system with helix-shaped bearing plates that transfer loads into the surrounding soil. A helical tieback is a type of helical anchor usually installed at an angle and connected to a wall or earth retention system to resist lateral forces.

Related pages

Service Areas

Vesta Foundation Solutions provides service throughout Oklahoma and Arkansas.

Resources

Access valuable resources to help keep your home healthy and your family safe.

The Thrasher Promise

At Thrasher, we pride ourselves on providing permanent solutions, and stand behind our work with industry-leading, fully transferable warranties and guarantees.

Schedule your free inspection today

Don’t let unanswered questions about your
home worry you any longer.
Go to Top