405.213.0492
Push Pier Systems2026-10-21T10:18:18-05:00

Commercial Push Pier Systems in Oklahoma City

Vesta Foundation Solutions installs commercial push pier systems to stabilize and lift settling foundations for commercial and industrial structures.

What Is a Commercial Push Pier System?

Commercial push piers are steel foundation supports hydraulically advanced through unstable soil to reach competent load-bearing soils or bedrock. The piers connect to the foundation using engineered brackets designed to transfer structural loads.

Every pier is effectively load-tested during installation to verify capacity. After all piers have reached the required resistance, the system is locked off to provide permanent foundation support. When commercial foundation settlement has caused a loss of elevation, a controlled lift may also be attempted when conditions allow.

How Push Piers Stabilize and Lift a Commercial Foundation

The structure’s weight provides the reaction force used to hydraulically drive steel pier sections through unstable soil. Sections are added until the required resistance is reached, so installation depth is determined by site conditions rather than a predetermined depth.

Each pier is effectively load-tested during installation to verify capacity. After the piers are set, the building’s load is transferred to competent strata, providing permanent stabilization. Where commercial foundation settlement has caused a loss of elevation, the system can also be used to recover elevation when conditions permit.

Vesta Foundation Solutions Commercial Push Pier Solutions

  • Versatile Foundation Support for Commercial Buildings

    Model 288 Push Pier System

    The Model 288 Push Pier System delivers deep foundation support across a wide range of existing commercial structures. Its sleeved pier design helps improve resistance to bending near the foundation, which makes it a versatile choice when project loads and foundation conditions fall within the system’s design requirements.

    • 2.875-inch diameter steel pier tube
    • External sleeve reinforces the upper portion of the pier
    • Hydraulically driven using the structure as the reaction force
    • Installation depth determined by required resistance and subsurface conditions
    • Each pier is load-tested as it is installed
    • Suited to a range of commercial foundation configurations and project requirements

  • Greater Capacity for Heavier Structural Loads

    Model 350 Push Pier System

    For commercial projects with greater structural demands, the Model 350 Push Pier System delivers a larger-diameter foundation support option. The system widens the range of loads push piers can address while keeping the installation advantages of a hydraulically driven deep foundation system.

    • 3.50-inch diameter steel pier tube
    • Built for heavier structural demands than smaller push pier systems
    • Transfers foundation loads into competent bearing strata
    • Driven to required resistance instead of a predetermined depth
    • Installation itself verifies pier capacity
    • System selection and spacing can be designed for project-specific loads

  • High-Capacity Support for Demanding Commercial Applications

    Model 400 Push Pier System

    The Model 400 Push Pier System is engineered for demanding commercial foundation applications requiring higher load capacities. Its larger steel pier sections and heavy-duty foundation connection provide a high-capacity option for projects where structural loads exceed the capabilities of smaller push pier systems.

    • 4-inch diameter steel pier tube
    • Built for high-capacity commercial applications
    • Up to 39,000-lb. allowable system capacity with specified bracket and design conditions
    • Carries structural loads beyond weak or compressible soils
    • Capacity verified as the pier is installed
    • Designed according to project loads, foundation conditions and subsurface conditions
How it works

Our Push Pier Installation Process

1.

Expose the Footing & Install Brackets

Soil is removed to reach the foundation footing at each pier location. A steel foundation bracket is positioned and secured against the existing footing, establishing the connection between the structure and push pier system.

2.

Hydraulically Drive the Push Piers

Steel pier sections are hydraulically driven through each bracket using the structure and contributory soil load as resistance. Pier sections are added until the required drive resistance is achieved in competent load-bearing soil or bedrock.

3.

Shift the Structural Load

Once the required resistance is achieved, the building’s load moves from unstable soils through the brackets and push piers to competent strata below. When conditions allow, a controlled lift may be attempted to recover lost elevation.

4.

Lock Off the System & Backfill

After stabilization and any planned lift are complete, the push pier system is secured permanently. Excavated areas are then backfilled to finish the installation.

Push Piers vs. Helical Piers: Choosing the Right Deep Foundation Solution

Push piers use an existing structure’s weight as resistance during installation, which makes them well suited for many heavier existing buildings experiencing foundation settlement. They are hydraulically driven until the required resistance is reached.

Helical piers are advanced into the ground using rotational torque and don’t rely on structural weight for installation. That makes them well suited for lighter structures, additions and new construction. Which system is appropriate ultimately comes down to structural loads, foundation configuration, subsurface conditions and project requirements.

Commercial Push Pier Installation You Can Trust in Oklahoma City

Specifying the right push pier system starts with understanding the structure, foundation loads and subsurface conditions. Vesta Foundation Solutions reviews the project requirements and works with the project team to determine the appropriate push pier system, installation criteria and stabilization approach.

Contact Vesta Foundation Solutions to discuss your commercial foundation repair project in Oklahoma City and receive a solution designed around the conditions of your structure and site.

What To Expect

Ready to get started?

Schedule a free estimate to start your repair journey with Vesta.

Schedule your inspection

Fill out our form or give us a call to book your inspection. Share what you’ve noticed so we can send the right expert to your home.

Full home
inspection

An expert will inspect the problem area and surrounding conditions, including soil movement, drainage, structural integrity, and any related concerns.

Clear explanation
of findings

We’ll walk you through what we’re seeing in easy-to-understand language so you know the root cause of the issue, not just the symptoms.

Review recommendations

If repairs are needed, we’ll outline your options, pricing, and timeline so you can make the best decision for your home.

Schedule your free inspection—

It'll only take
a minute

Meet with a trusted expert, and get
clear answers about your home.

"*" indicates required fields

1Your Info
2Schedule Your Inspection
3Review & Submit

Customer Information

Don't just take our word for it

See what our customers have to say about our work.

This is for logan and rolo who showed up at the appointed time and did a great job. they had a breakdown of equipment and had to come back the day after but were prompt to finish the job. During the repair, a car became stuck in a neighbors driveway and they were the first to help the person- to help someone else in need. I was really impressed with that. I give a 5 star review and rating. I plan to do additional work because they would be doing it. I enjoyed their friendliness and workmanship.

Brent M. | Coweta, OK

Everything went as expected, maybe a little better! Very nice crew, enjoyed the installation all around!

Bob H. | Tulsa, OK

Gino H. from Shawnee, OK purchased a charming old home built in 1939 with a full basement. Expanding soils that are so prevalent in many areas of OK exert an enormous pressure on foundations. As a result, most homes with full basements will eventually develop some sort of structural issue over time. When Gino learned about the problems, he decided to call Vesta Foundation Solutions for help. In this video, he speaks about his experience with the company. He is so happy with the service that he is hiring the company again, to repair another one of his properties. “I would absolutely recommend Vesta Foundation Solutions to any friends or family,” says Gino.

Gino H. | Shawnee, OK

“We knew something wasn’t right when the doors stopped closing properly and cracks started showing up. The Vesta team walked us through everything with total transparency. The crew was professional, fast, and left our place cleaner than they found it. Now our home feels solid again, and we finally have peace of mind.”

David R. | Luther, OK

“I’ll give the guys (Cory and Jose) a great 5+ rating. Great, efficient installation. They were very pleasant and professional.”

Nancy S. | Guthrie, OK

“We had no idea how bad things had gotten under our house until the Vesta team showed us the damage. They were honest, thorough, and explained everything clearly. The crew worked efficiently, replaced the damaged wood, and gave our floors the support they needed. It’s such a relief to walk through the house and not feel everything shifting. We’re incredibly thankful for the work they did.”

Sally B. | Nicoma Park, OK

Bryan and Cornileus were amazing. Our project was huge and required a lot of heavy lifting. Every day, they came to work with smiles on their faces and were hardworking the entire time. Bryan was great at communicating the process and what to expect. He would call me every morning to let me know where he was and at what time to expect him. Very reliable. They both are great around kids and were a joy to have in our home! Thanks guys!!

Shelby D. | Crescent, OK

I had a sinking concrete apron around my pool. I was considering replacing the concrete, which is very expensive, or “mudjacking” the concrete back in position. For about the same price as mudjacking, I hired Vesta Foundation Solutions to inject a polymer in the ground and bring the concrete back in position. I was very pleased with the results, and I feel I saved a considerable amount of money from other solutions available to me. William Blake, the hands-on owner, did an excellent presentation of his product. The work was completed in a timely manner by Adam and Daniel, who took extra time to explain the process as they were doing the work. The work site was cleaned up when the fellows were finished, and Mr. Blake reviewed the finished work to ensure I was satisfied. I am very satisfied with this type of concrete lifting process, and I can certainly recommend the workforce at Vesta Foundation Solutions for their professionalism, thoroughness, and friendliness in getting the work done.

David O. | Edmond, OK

Ricardo and his team did an excellent job installing my 10 piers. He was very informative, polite, and took good care of my yard and my house. Definitely would use them again.

Mia J. | Edmond, OK

Before & after photos

Check out before and after photos from some of our completed projects.
View All Before & Afters

Find Your Local Vesta Location

Vesta Foundation Solutions of Oklahoma City and Arkansas are the experts for concrete leveling and repair, foundation repair, basement waterproofing and crawl space repair and more. We proudly service Fayetteville and all of Greater Fort Smith surrounding areas in Arkansas, Oklahoma City, Tulsa, Edmond in Oklahoma.

Commercial Push Pier Systems FAQs

Do push pier projects require a structural engineer or a permit? 2026-10-06T09:57:02-05:00

Requirements vary by project and by local jurisdiction. Commercial push pier projects usually involve engineered design or review to set loads, pier locations, capacities and installation criteria. Permits and inspections may also be required. Vesta Foundation Solutions can help identify the engineering, documentation and permitting requirements that apply to your project.

What do commercial push piers cost in Oklahoma City? 2026-10-06T09:56:18-05:00

Commercial push pier pricing depends on the number and type of piers, required capacities, installation depths, foundation configuration, access and excavation requirements. Mobilization, site constraints, engineering, permitting and restoration also affect total project cost. Vesta Foundation Solutions can evaluate the structure and project requirements to build a scope and estimate for the recommended system. 

Are push piers permanent, and how long do they last? 2026-10-06T09:55:39-05:00

Push piers are designed as a permanent foundation stabilization solution. The steel components are engineered for long-term structural support, but service life depends on the system, site conditions, corrosion potential and installation. Project-specific specifications need to address any additional corrosion protection or durability requirements for the site.

Will push pier installation disrupt operations at my facility?2026-10-06T09:55:00-05:00

It will depend on the pier locations, access, excavation requirements and the facility itself. Push piers can often be installed with relatively compact equipment and localized excavation, which can help limit disruption compared with more extensive foundation work. Vesta Foundation Solutions can assess access and sequencing requirements while planning the project. 

How deep do push piers go, and do they have to reach bedrock? 2026-10-06T09:54:18-05:00

There’s no standard depth for a push pier. Pier sections are advanced until the required installation resistance is reached, which may occur in competent soil or at bedrock. Actual depths can differ across a single site as subsurface conditions change, so push piers do not always need to reach bedrock to provide adequate support. 

Push piers or helical piers — which is right for my building? 2026-10-06T09:53:39-05:00

The correct system comes down to structural loads, foundation configuration, subsurface conditions and whether the project involves an established or a new structure. Push piers are often suited to heavier existing structures because installation uses the building as reaction force. Helical piers don’t need structural weight for installation, making them a fit for lighter structures, additions and new construction.

How do push piers work on a commercial foundation? 2026-10-06T09:52:58-05:00

Push piers stabilize a commercial foundation by transferring the building’s load from unstable soils to competent load-bearing soil or bedrock. Steel pier sections are hydraulically advanced to the required resistance and then connected to the existing foundation with steel brackets, creating a permanent deep foundation support system. 

Related pages

Service Areas

Vesta Foundation Solutions provides service throughout Oklahoma and Arkansas.

Resources

Access valuable resources to help keep your home healthy and your family safe.

The Thrasher Promise

At Thrasher, we pride ourselves on providing permanent solutions, and stand behind our work with industry-leading, fully transferable warranties and guarantees.

Schedule your free inspection today

Don’t let unanswered questions about your
home worry you any longer.
Go to Top